e50 motor parts


Thorens E50 Motor - the heart of your TD turntable

 

In unrestored condition a guaranteed source of annoying background noise such as rumble.  A revised motor develops much less vibrations, runs very quietly and thus transmits only minimal disturbing noises to the chassis.

Revised motors usually reach the target speed of e.g. 33rpm effortlessly in just one single turn of the heavy main platter! 

 

Treat your motor with a revision, you will be amazed by the difference in sound!

 

You can't do the job by yourself ? We can take over this job for you, please see

the description  in our "Restorations & Repairs" section.



E 50 Motor Rebuild kit


Complete rebuild kit including all parts needed for a perfect motor rebuild.

Suitable for MkI, as well as for MkII models.

 

Your motor reaches the correct speed only after a long time, the motor makes noises and gets extremely hot?

These are clear signs of a non-properly working motor!

After 50 years or more, a complete revision of the motor is inevitable and highly recommended.

 

A perfectly rebuild motor will normally reach the selected speed after only one turn of the heavy main platter (!)

 

This kit also includes a 20ml bottle of matching oil, made in Switzerland.

 

You do not want to do the repair by yourself? Riverside Audio offers a fast and reliable repair service, please visit motor rebuild in our “Restorations & Repairs” section for more informations. 

CHF 120.00

  • 0.5 kg
  • Ships within 1-3 days

Screw-kit for E50 Motor

Zinc-plated screw kit consisting of 4 screws, 4 spring washers and 2 nuts

Screw-kit for E50 Motor

CHF 14.00

  • 0.1 kg
  • on stock / am Lager
  • Ships within 1-3 days

Set-screws for motor-pulley

2 pcs. zinc-plated set-screws for motor-pulley

2 set-screws for motor-pulley

CHF 5.00

  • 0.1 kg
  • on stock / am Lager
  • Ships within 1-3 days

Motor-suspension & conversion kit "A"

Complete kit for upgrading the E50 MkI motor suspension to the improved MkII version. 

 

Factory installed MkII suspensions back in the 60’s contributed significantly better decoupling of the motor from the chassis.

 

The result after the conversion is clearly audible, the sound improvement considerable.

 

One of the 3 old suspension pins has to be drilled out for the conversion, this requires a drill.

 

The last 2 pictures are showing an already to MkII specs converted motor. 

(not included)

CHF 80.00

  • 0.25 kg
  • Ships within 1-3 days

Motor-suspension & conversion kit "B"

ORIGINAL N.O.S. THORENS SPRINGS – VERY SHORT SUPPLY

 

Upgrade kit with springs instead of the normaly used 6 rubber dampers to convert your E50 MkI motor suspension to the upgraded MkII version (as described above).

 

This kit contains 3 springs Instead of the normally used 6 rubber dampers.

 

These springs were developed towards the end of production time of the TD124 MkII.

Since at that time the successor model TD150 was about to be introduced, the springs were never installed in 124's.

They became obsolete and disappeared somewhere in storage.

 

For installation in MkI models, the longer suspension pins of the MkII version are also required and included in this kit. Advantage over suspension with rubber dampers is a measured -2dB improved rumble level.

 

The last 2 pictures are showing a already converted motor (not included)

 

CHF 95.00

  • 0.25 kg
  • Ships within 1-3 days

Motor-suspension kit with springs

ORIGINAL N.O.S. THORENS SPRINGS – VERY SHORT SUPPLY

 

This spring-kit replaces the normally used rubber dampers on E50 motors.

Advantage over suspension with rubber dampers: a -2dB improved rumble level.

 

These springs were developed towards the end of production time of the TD124 MkII

Since at that time the successor model TD150 was about to be introduced, the springs were never installed in 124's.

They became obsolete and disappeared somewhere in storage.

 

For installation in MkI versions, the longer suspension pins of the MkII version are required (available in our shop)

 

Installation in MkII versions: remove all of the 6 rubber dampers and replace by springs.

 

These springs will also fit all PAPST motors, without any modifications.

 

The last 2 pictures are showing an already converted motor (not included)

CHF 45.00

  • 0.25 kg
  • Ships within 1-3 days

Motor rubber-damper

Exact reproduction of the original motor rubber-damper.

Set of 6 dampers. 

CHF 30.00

  • 0.1 kg
  • Ships within 1-3 days

Motor suspensions pins

E50 motor suspension pins for conversion of MkI to the improved MkII version.

Set of 3  pins.

One of the 3 old suspension pins has to be drilled out for the conversion, this requires a drill. 

CHF 50.00

  • 0.25 kg
  • Ships within 1-3 days

Rubber belt TD124 etc.

Exact reproduction of the original CB 965 rubber belt. 

This belt will also fit the following models: TD121, 134, 135, 184 and 224

Please make sure to clean your motor pulley as well as the step pulley before installing the new belt.

CHF 25.00

  • 0.1 kg
  • Ships within 1-3 days

Ground-wire for E50 motor

Ground-wire for E50 motor with silver-plated terminal lugs

Ground-wire for E50 motor

CHF 12.00

  • 0.1 kg
  • on stock / am Lager
  • Ships within 1-3 days